Assembly instructions – Yetter 1300 Series Bulk Seed Handling Equipment User Manual

Page 10

Text mode
Original mode

ASSEMBLY INSTRUCTIONS

SEED TRAIN TROLLEY 1300-133 (CONT.)

Step 3.

Attach the 1300-235 trolley roller frame to the motor trolley bracket using 4) 5/8” x 3” carriage

bolts, bearing, ¾” spacers, 2) 5/8” flat washers, 2) 1300-487 trolley guides and lock nuts.
NOTE: DO NOT OVER-TIGHTEN THE 5/8” LOCK NUT, THE BEARING MUST TURN FREELY.

Step 4.

Attach the 2) 5/8” X 3” carriage bolts, 2) bearings, 5/8” flat washers, 2) 1300-487 trolley guides

and 5/8” lock nuts to the front holes of the 1300-235 trolley roller frame. Note: Use the 5/8” flat washers as
needed to space the bearing and the trolley guide. The trolley roller frame needs to roll smoothly back and
forth on the track.