Avenview FO-HDMI-SET - Manual (Page 4)

www.avenview.com 4
1.4 Introduction
Avenview FO-HDMI-SET consists of a Transmitter and Receiver that lets you extend HDMI signal from DVD
Player, Blu-ray Player Set-top box, console systems or other video equipments over fiber optical signal without
any signal degradation.
- High Speed and long distance transmission by Optical fiber (LC type Multi-Mode 4-ch fiber.
- Extends up to 100 meters (330 feet)
- Compatible with HDMI 1.3 Standard
- Backward compatibility with DVI Standard 1.0
- Supports HDCP compliant device
- Supports up to 1080p for HDTV and UXGA (1600 x 1200) resolution
- DDC and DEC signal line is transmitted by copper line (CAT5) between internal and external power
1.5 Package Contents
Before you start the installation of the converter, please check the package contents.
- Receiver x 1
- Transmitter x1
- Power Adapter (+5VDC, 1.2A) x1
- Copper male to male HDMI Cable (-.5m) x2
- User’s Manual
1.6 Before Installation

Put the product in an even and stable location. If the product falls down or drops, it may cause an
injury or malfunction.

Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high
humidity.

Use the DC power adapter with correct specifications. If inappropriate power supply is used then it
may cause a fire.

Do not twist or pull by force ends of the optical cable. It can cause malfunction.