Tivax LSS-602 - Manual (Page 8)

Connecting Machine to Power Supply
Power supply plug
Outlet
Machine socket
Machine plug
Power switch
1.Turn off the power switch .
2.Insert the machine plug
3.Insert the power supply plug
into the outlet .
4.Turn the power switch to the left or right to turn on the power.
Before Using Your Sewing Machine
Before using your sewing machine for the first time, place a waste fabric under the
presser foot and run the machine with thread for a few minutes. Wipe away any oil
which may appear.
For Your Safety
While in operation, always keep your eyes on the sewing area. Do not touch any
moving parts such as the thread take-up lever, handwheel or needle.
Always turn off the power switch and unplug from the power supply:
n When leaving the machine unattended.
n When attaching or removing any parts.
n When cleaning the machine.
Do not place anything on the foot control, when not sewing.
SECTION . GETTING READY TO SEW
3
Stitch choosing button
Sewing straight stitch
Sewing other stitches
Left position
Middle position
Right position
Left & right needle positions:3 to 6
Middle position: 2
Three needle positions:7 to 12
When you push button to the right, green indicator of stitch pattern is on default
stitch 1. All stitches can be chosen as you like by pressing stitch pattern button.
When you push button to the left, straight stitch is chosen. Moreover, there are
three needle positions.
Needle position adjusting. If you need another needle position to sew fabric with
a straight stitch , draw fabric and needle thread out, push button to the right and
choose stitches other than straight stitch, then needle position is changed as you
like. Stitches can be adjusted into different needle positions below.
SECTION . SEWING
16