Tivax HiRez 7 Docking Station - Manual (Page 2)

b) Using AA batteries
z When no other power source is available, you may choose to use AA batteries.
z Remove the battery cover at the rear of the DS by pulling the battery compartment tab
toward you.
z Install 8AA regular batteries in the rear of the docking station making sure the battery
terminals +/- match the +/- signs on the bottom of the docking stations to ensure correct
electrical polarity.
z Attach the included power cable to the AA Battery Out on the DS ③ and to the AA Battery
In on the Hi-Rez
7
TV.
z Turn the TV on and refer to the operating procedures in the TV’s users’ manual.
3. Use the DS to charge the Li-Ion batteries
Note: Please remove the AA batteries from the unit. The Li-Ion batteries will not charge if AA
batteries are inserted in the unit.
1) Installing the Li-Ion batteries (in the docking station)
z Remove the battery cover from the bottom of the docking station.
z Remove A. and B Li-ion batteries from the portable TV.
z Insert A and B Li-ion batteries in the opening at the bottom of the docking station making sure the
battery terminals +/- match the +/- signs on the battery cover to ensure correct electrical polarity.
Please note the batteries are different in size and will only fit in appropriate charging
compartment.
z Place battery cover back by pressing down and pushing into the slot.
z Connect power adapter to docking station and to the power supply.
„ Note: If the Li-ion battery is not placed correctly in the docking station, the LED light will be
flashing red.
z LED light will turn red (no flashing) during the time batteries are being charged.
z LED light will turn green when batteries are fully charged.
Note: Unplug the power adapter if the machine is not being used.
www.tivax.com