Telenav for Sprint Supported Devices: v4.1 for Palm Treo 700wx - Manual (Page 10)

© TELENAV 2003-6 PAGE 10 OF 29
Registration
The next screen will notify you that you will need your 10-digit phone number ,
also referred to as an account number, and your 4-digit PIN.
NOTE: Your account number MUST be the same as your carrier phone
number beginning with area code so that when you call the Voice Address Input
System you will not need to type in the account number.
Input your TeleNav account number and the PIN your provided when registering
for TeleNav service at
www.telenav.com
After you have entered the account number at 4-digit PIN, press the Submit
button.
A warning message will be displayed, press OK to complete the setup process.
NOTE: If your TeleNav account is not active, you will be notified at this point,
and will be directed to go to www.telenav.com to extend your service
agreement. You will not be able to progress beyond this point until your account
is returned to current status. You may also see an important message from
TeleNav regarding upgrades, scheduled downtime, pending account expiration,
etc.
When the smartphone reaches the TeleNav servers with a valid and active
phone number and PIN, the handheld will be registered to use TeleNav, and will
not present any of the above screens except the splash screen in the future.
Visiting
www.telenav.com , and changing the PIN will require you to repeat the
above registration process.
TeleNav Bluetooth GPS Configuration
The GPS location information is provided by a TeleNav Bluetooth GPS receiver,
therefore you must configure the GPS receiver before you can access