Telenav Scout v1.5 for iPhone (open market) - Manual (Page 96)

 Route Settings – Choose Fastest, Shortest, Avoid Highway, or Pedestrian. By default, all
routes are “Fastest” to minimize traffic delays. You can also choose to Avoid Traffic, Avoid
Tolls, or Use Carpool Lanes to find the best route for your purposes.
NOTE: The “Pedestrian” route style may make your walking route easier, for example by allowing you
to take advantage of going the wrong way down one-way streets. As always, use your common
sense to determine the safety of any route.
 Map Color – Choose from Auto, Daytime, or Nighttime. Nighttime colors have greater contrast
to let you better see the navigation screen in the dark. Choose “Auto” to have the navigation
maps switch to Daytime and Nighttime colors based on your location.
 Moving Maps – Choose either 3D Moving Maps or 2D Moving Maps as your default during
navigation.
 Back Light – Choose Always On or Device Default.
 Speed Limit – On or Off. If On, the bottom toolbar during a navigation session will turn red if
you exceed the posted speed limit.
 Speed Trap – On or Off. If On, speed trap icons reported by other Scout users will appear on
navigation maps.
 Lane Assist – On or Off. If On, you will see the Lane-Assist graphic when you are about to
enter multi-lane highway junctions or at intersections.
 Traffic Incident Alert – On or Off. If this feature is on, audio and visual traffic alerts will appear
on the 2D or 3D Moving Maps screen if there is a traffic incident on the route ahead.
 Traffic Camera Alert – On or Off. If this feature is on, you can view red light camera locations
on maps and navigation screens.
11.4 Maps On My Device
When you are out of network coverage, Scout will seamlessly go into
“Always There Navigation mode” so that you are still able to get
navigation instructions and audio. To enable Always There Navigation
mode to kick in when you are out of network, you must first download
regional map data. This download is encouraged so that the app can
always get navigation instructions even during network interruption.
1. Go to My Profile >> Maps On My Devices.
2. Choose a map region to begin your download.
A WiFi connection is required for the regional map data download. The
speed of the download depends on your WiFi connection, which you must
maintain for the download. If you lose connection, download will pause
and then resume when you are back in coverage. You can interact with
the application while the downloading is in progress.
NOTE: You can only store one map region at a time on your device. If
you download a new region, the one you currently have downloaded will
be replaced. In Always There Navigation mode, certain functions such as
“Speak It”/Voice Command, satellite image during navigation, and traffic
will not work.
11.4.1 Online vs. Offline Features
The following table shows which features are available when you are within wireless network coverage (“online”).
Features with checkmarks in both columns represent Always There Navigation mode (“offline”).
© 2012 Telenav, Inc. Page 96 of 120