beautypg.com

Spyder Auto Proper Headlight Adjustment for Spyder Auto Headlights User Manual

Page 2

background image

Look at the light pattern on the wall. Vertical aim: The top of the most intense part of the beam should be at or below
the centerline of the headlamp horizontal tapeline. Horizontal aim: Most of the intense part of the beam should be to
the right of the vertical centerline of the headlamp assembly.

Please check with your state and local laws for the specific placement of your headlight beams. There should be very
little “kickup” after your adjustment. The most intense part of the light (middle) shouldn’t have much bleeding from the
light – the idea is to be able to pick up road signs and pedestrians while still be considerate of oncoming traffic.

Below is an actual picture of what your projector cutoff line should look like.

Here is a picture of what the headlights should look like in comparison to the wall.

For additional information or troubleshooting please contact us at

[email protected]

or reach us by phone

at (626)934-8884.