Spyder Auto Chevy Silverado 03-06 Headlight Grille - Manual (Page 2)

Remove the Plastic engine cover from under the
hood. Use the panel poppers to remove the clips.
Once you remove the cover, take the grille apart.
Using a plier, press on the clip on the rear to pull the
grille out easily. There should be 5 clips holding the
grille.
Remove the Headlight and Corner Light from the
vehicle. There is one pin that hold the headlight and
a clip that holds the corner light. When you remove
the housing, unplug the light sockets but leave the
light bulb on the headlight.
Transfer the bulb from the factory headlight to the
new headlights. The top is Low beam, the bottom
is high beam. Once you put the bulbs on, return to
the truck and insert the turn signal, daytime running
lights, and parking lights onto the socket.
When installing the Headlight, insert from
inside where the side bracket is showing, as
shown in the picture
Align the bracket and hook from where the ar-
row is pointing at. (arrow 1) is the clip, (arrow
2) is the hook.
Insert the new clips on the grille, the longer
clips is on top and the short one is on the bot-
tom.
STEP: