Sper Scientific 800005 Thermometer Advanced w/RS232 - Manual (Page 7)

6
• 11
Tripod connector
• 12
Battery cabinet cover
IV. Operation Instructions:
4.1 Power-Up
Press the
• I
key to turn the thermometer On or OFF
4.2 Connection the Thermocouples
For measurement, plug the thermocouple into the
input connectors.
4.3 Selecting the Temperature Scale
When the meter was first power on, the default scale
setting is set at Celsius (°C) scale. The user may
change it to Fahrenheit (°F) by pressing “ °C/°F ”
button and vice versa to Celsius.
4.4 Selecting the Thermocouple Type
By default, when the meter is powered on, it is
K-Type, One may press and hold “°C/°F” button and
then power on the meter, then it will change to
J-Type.
4.5 Data-Hold Operation
The user may hold the present reading and keep it on
the display by pressing the “
HOLD
” button. When the
hold data is no longer needed, one may release the
data-hold operation by pressing “
HOLD
” button again.
When the meter is under Data Hold operation, the
“
•
REL”, and “ °C/°F ” button are disabled.
4.6 Timer Operation:
One may start the timer by press the “ TIMER
”
button. The counting can be stopped or continued by
pressing it again.