Sper Scientific 840024 Digital Radiation Meter - Manual (Page 7)

- 7 -
1. Press the button. The meter
performs a system check and
displays all indicators for
approximately two seconds together
with a Beep signal. When in use,
the instrument will emit a “chirping”
sound that increases in rate
according to the radiation intensity.
2. When powered on, the
measurement scale will default to
Micro-Sieverts per hour (T1).
Press the button to change
the measurement scale to
milliroentgens per hour (T2).
3. Hold the meter as shown on page
12 for detecting Beta radiation. Hold
the meter as shown on page 13 for
detecting gamma and x-ray
radiation.
OPERATING
PROCEDURES