Sper Scientific 850061 pH SD Card Datalogger Kit - Manual (Page 13)

- 13 -
SETUP MODE
1. Press POWER to turn the meter
on.
2. Press SET for 2 seconds or
longer to enter Setup Mode.
3. Press SET to cycle through the
setup functions.
Note
Press ESC to exit Setup Mode. The
meter will return to Normal Mode.
SD Memory Card Format
Enabling this function will format the
SD memory card to work specifically
with your meter. Formatting the SD
card will erase any previous memory
on the card. New SD cards should
be formatted to work with your meter.
1. Enter the SD memory card format
function from Setup Mode (see
page 13). “Sd F” appears on the
LCD.