Sper Scientific 850075 Light Probe - Manual (Page 2)

- 2 -
7
9
8
10
II. PANEL DESCRIPTION
TABLE OF CONTENTS
I. INTRODUCTION ............................................................................. 2
II. PANEL DESCRIPTION ................................................................... 2
III. MEASUREMENT PROCEDURES .................................................. 3
IV. SPECIFICATIONS .......................................................................... 3
VII. WARRANTY .................................................................................... 4
I. INTRODUCTION
This probe features two measuring units, Lux and Foot Candle (FC). The
sensor uses a photo diode and color correction filter, tightly calibrated to
the CIE Photopic response curve. With the plug-and-play feature of this
probe, calibration procedures are not required. The meter features Hold,
Max./Min, RS232 and Auto Shut Off. The meter features Hold, Max./Min,
RS232 and Auto Shut Off.
1. LCD Display 5. A (Lux/FC) Button 9. Probe Lock
2. Power Button 6. B (Range) Button 10. Probe Input Socket
3. REC. Button 7. Battery 11. Light Sensor
4. Hold Button 8. Temperature Input
11