Sper Scientific 840073 Multimeter - Auto-Ranging - Manual (Page 20)

G. Make Measurements(5)
3. DC Current Measurement
(figure 4)
(figure 4)
1) This range is manual range. Do not measure, when value between
open voltage and earth exceeding safety voltage 60V, to avoid
damages to the Meter or to the instruments under test, and hurt the
user.
2) Before measurement, cut off
the power of object to be
measured and inspect whether
input terminal or rotary switch
is set to the proper range.
Ensure it is proper, and then
you can measure the object
with power on.
20
Model UT30A: OPERATING MANUAL