Sper Scientific 840079 Multimeter with True RMS User Manual
Page 3
Model 840079 (UT60E): Software Installation & Instructions
3
During the connection, you can select the following functions by clicking the corresponding icon or the menu bar:
Repeat:
Click the box to keep the repeated record, or unclick the box to ignore the repeated record. The
repeated records will be shown in graphic no matter what the selection is.
Sampling Interval: Click to enable sampling interval function, or unclick to disable the function
Enter the sampling interval’s time, the unit is second.
Clear:
To clear all the current records permanently.
Open fils:
To read records form old file (*.db) .
Save as:
To save all the current records to file
（*.txt、*.xls、*.db）。
print:
To print the current records.
(figure 4)
F. Max Min Operations (see figure 5)
MIN:
The maximum value obtained
MIN: The
minimum
value
obtained.
SetMax: Click to enable the SetMax function or unclick to disable.
Enter the upper limit value in integer. It will only compare the current value obtained to the upper limit in
integer, it does not identify range or function,
SetMin: Click to enable the SetMin function or unclick to disable.
Enter the lower limit value in integer. It will only compare the current value obtained to the upper limit in
integer, it does not identify range or function.
:
The Meter is connected properly to the computer and data is recording.
OL!!
Overload, the recorded value exceeds the SetMax and SetMin value. It will be flashing and the computer will
sound if loudspeaker is installed.
（figure 5）
Enable SetMax function
The maximum value obtained
The minimum value obtained
Upper limit setting
Lower limit setting
Connected & data is recording
Red line indicates the range of limits set
Keep or ignore the
repeated record
Enable or disable
Sampling interval
Set the sampling
interval in second
Clear
Open file
Save as