Sper Scientific 850082 ATC Temperature Probe - Manual (Page 2)

- 2 -
II. PANEL DESCRIPTION
1. LCD Display 6. B & Left (PH / mV) Button 11. Probe Lock
2. POWER Button 7. C & Down (CAL) Button 12. Probe Input
3. REC. Button 8. D (TEMP.C) Button Socket
4. HOLD Button 9. Battery 13. Probe Head
5. A & Up (°C/°F) Button 10. pH BNC Input Socket 14. Probe Handle
13
TABLE OF CONTENTS
I. INTRODUCTION ............................................................................. 2
II. PANEL DESCRIPTION ................................................................... 2
III. MEASUREMENT PROCEDURES .................................................. 3
IV. SPECIFICATIONS .......................................................................... 3
VII. WARRANTY .................................................................................... 4
I.
INTRODUCTION
When used in combination with a PH Probe (e.g. 840016), this ATC Probe
is capable of obtaining the most accurate PH and temperature readings
possible. With the plug-and-play feature of this probe, calibration proce-
dures are not required. The meter features Hold, Max./Min, RS232 and
Auto Shut Off.
14
8 7