Speedtech Brake Line Kit - Manual (Page 4)

block the port with the supplied 1/8” npt plug. The proportioning valve can
now be installed on the firewall.
If using a brake booster, you will need to bend the bracket down
approximately 30 degrees to clear the booster and bend the ends of the
brake line to match.
NOTE: We have NOT supplied brake lines that go from the master
cylinder to the proportioning valve. This is due to variations in fittings and
master cylinder designs. The easiest way to complete the connection
would be to use braided flex lines that you can purchase from a
performance parts retailer. If you have the proper tools, you can fabricate
custom hard lines.
4 | P a g e