Speedtech Down Tube Brace User Manual
Page 2
2 |
P a g e
Thank you for purchasing your new Speedtech Subframe Down Tube
Braces. Installation is straight forward and relatively easy, and in most cases
can be installed without removing any major components. They do require
fitting and welding to complete the installation in order to provide the best
possible product performance and fit. If you do not have welding skills and/or
access to a welder, make arrangements ahead of time to have them availa-
ble during installation.
Down Tube Hardware Kit Checklist
Instructions -1 4
– 7/16 x 1 ¼ Socket head stainless bolts
4
– 7/16 Nylock nuts
10
– 3/8 x 1 Button Head stainless bolts
10
– 3/8 Nylock nuts and washers
1.
MAKE SURE THE SUB FRAME IS IN IT’S FINAL POSITION with all the
weight on the car PRIOR to fitting the down tubes. This includes final body panel
fitment.Note the following photos are of a completed bar. To ensure a custom fit
to your application, mock up all parts before welding. Some trimming may be
required.
2. Start by bolting the lower frame mount to the frame boss in front of the shock
using the supplied 7/16 x 1 ¼ socket head cap screws.