Speedtech B Body Rear Coilover - Manual (Page 9)

9 | P a g e
7. Be sure all bolts are tight.
8. Repeat this process for the other side.
9. With the weight off the rear suspension, support the rear axle and set the initial
ride height according to manufacturer recommendations. Replace wheels and
tires and carefully lower the vehicle back onto the ground. Now fine tune your
ride height adjustments.
Because you have used factory mounting points as a base for this kit a wheel
alignment may not be necessary. If you have installed adjustable trailing arms
and/or changed front suspension components at the same time we do
recommend having an alignment performed by a reputable source familiar with
performance based alignments on older vehicles.
Note: Use alignment specifications on next page, not alignment shop
pre-programmed factory specs!