Speedtech A Body rear Trailing Arms - Manual (Page 2)

2 | P a g e
A Body Rear Trailing Arm Hardware Kit Checklist
Installation Instructions (1)
Articulink Upper Trailing Arm (2)
Articulink Lower Trailing Arm (2)
Sway Bar End Link Assemblies (2)
Sway Bar End Link Brackets (2)
Trailing Arms
½ x 3 ½ “ Bolts (8)
½” Stover Lock Nut (8)
½ ” dia. Bolt Sleeves (6)
Sway Bar Links
3/8 x 2” Fine Bolts (4)
3
/8” Fine Nylock Nuts (4)
3/8” Washers (4)
Sway Bar Link Brackets
3/8 x 3/4” Coarse Bolts (16)
3
/8” Coarse Nylock Nuts (4)
3/8” Washers (8)
*
Additionally you will need a drill with a 3/8” bit to properly mount the
sway bar end link brackets.
The vehicle should be on a level surface before you start.