Speedtech 70-81 Camaro T56 Crossmember - Manual (Page 2)

2 | P a g e
The following instructions are intended for professional installers
and are guidelines only.
Speedtech Performance assumes NO
responsibility for the installation of any of its products. All products are
intended for off road use only and must be installed by qualified
professionals only.
Thank you for purchasing your new ATS AFX spindle Kit. Installing this product will require the
removal of some frame components and will require working on the bottom of your car. Take
all necessary precautions whenever jacking up your vehicle and use safe and sturdy jack
stands to support the vehicle whenever it is off the ground. Be sure to take all other safety
precautions required to do the job correctly.
Crossmember Kit Checklist
1- Left Side Frame Bracket (1) 4- Stainless Receiver Doubler Plate (2)
2- Right Side Frame Bracket 5- Stainless Adjuster Receiver (2)
3- Crossmember Assembly (1) 6- 5/16-24 x 3/4
” Cap Screw (4)
- 5/16-24 x 1” Cap Screw (4)