Schumacher SAC-110 User Manual
Page 7
![background image](/manuals/404381/7/background.png)
•
4
•
it is not recommended to leave the power converter plugged into the
•
vehicle’s 12v accessory outlet while the car is not running. doing so may
drain the vehicle’s battery.
unplug the power converter from the 12v accessory outlet before starting
•
the vehicle. not doing so could cause damage to the converter or device
plugged into the converter.
the red led illuminates when the power converter receives power from
•
the 12V accessory outlet. The power converter is equipped with a five
amp fuse, located in the neck of the converter, for overload protection.
see the troubleshooting section for instructions on how to replace the
fuse.
turn on the electronic device.
•
WARNING: to ensure that damage will not occur, check the voltage
and polarity of the electronic device before using this product. always
switch off appliances prior to insertion of plugs. failure
to do so may cause damage that is not covered by the normal warranty. it
is best to check your owner’s manual.
Storage of Adapter Plugs and Converter
4.4
the carrying case is equipped with 10 pocket holders for the adapter
•
plugs and a strap for the converter.
The first four pockets across the top are specifically labeled for each
•
connector.
the rest of the pockets have suggested labels, but the adapter plugs can
•
be stored in any of the six pockets.
POWER SOURCE AND OUTPUTS
5.
the power converter operates with any 12 - 16.5v dc power source. the
converter’s power is dependant on and is determined by the charge and
life of the vehicle’s battery.
the power converter supplies dc voltage in the range of 3v, 4.5v, 5v
(usB), 5.4v (nintendo
®
, psp
®
, game Boy
®
, and nintendo ds
®
), 6v,
9v and 12v dc at a maximum of 2 amps.
Setting the wrong voltage
may damage the device you are trying to power. Read the device’s
owner’s manual specifications under the “input” section to
determine proper voltage. Using devices rated over 2 Amps will blow
the fuse and could cause damage to the power converter.
SPECIFICATIONS
6.
input voltage
12 - 16.5v dc
output voltage
3v, 4.5v, 5v (usB), 5.4v (nintendo®, psp®, game Boy®, and
nintendo ds®), 6v, 9v, 12v dc
fuse
5a /250v
adapter plugs
micro usB, mini usB, usB, game Boy®, nintendo ds®, 2.3mm
yellow, 3.3mm orange, 4.0mm yellow, 5mm red, 5.5mm blue, 5.5mm
white.
dimensions
7 x 1.42 x 2.75”