Rocky Mountain Radar RMR-C435 - Manual (Page 8)

SCRAMBLER ACTIVATION:
All scramblers are factory set to the OFF
position.
RMR-C435 to turn the scrambler on/off, power off
the unit, press and hold the City button down while
turning power back on the unit.
If the scrambler is on, the “T” LED light will be
included in the start up sequence. If the scrambler is
off, the “T” LED light will not be included in the
start up sequence. The “T” LED light is the test
diagnostics for the scrambler.
SCRAMBLER OPERATION:
Drive normally. When the detector sounds an alert,
take your foot off the gas, check your speed, adjust
if necessary, and resume driving. Do not apply
brakes unless you are grossly exceeding the speed
limit. The scrambler will disable the radar long
enough for you to adjust speed safely, if necessary.
P X C 2 3 4 T /
WHEN SCRAMBLER SWITCH IS
ACTIVATED THE SCRAMBLER
TEST WILL BE INLCLUDED
IN THE START UP SEQUENCE
RMR-C435
Important information:
When driving in states that ban scramblers –
turn off the scrambler function. Detectors are
legal in all states except Virginia and Washington
D.C. With the scrambler off, this unit is only a
detector.
7