Alpine IVA-D300 - Manual (Page 35)

33
-EN
Connecting and Setting the External Expansion Box
This setting becomes necessary when the optional expansion box
(VPE-S431) is connected.
Setting item: EXPANSION BOX
Setting content: OFF / ON
OFF: Select when the expansion box (VPE-S431) is not
connected.
ON: Select when the expansion box (VPE-S431) is
connected.
Setting the VISUALIZER Mode Display
Select this display when displaying the source names of
VISUALIZER on the VISUAL selection screen.
Note that this setting is enabled only when the optional expansion
box (VPE-S431) is connected.
Setting item: VISUALIZER
Setting contents: OFF / ON
OFF: “VISUALIZER” and source names are not displayed on
the VISUAL selection screen.
ON: “VISUALIZER” and source names are displayed on the
VISUAL selection screen.
Setting the AUX Mode
Setting item: AUX IN-1, 2, 3
Setting content: OFF / ON
OFF: AUX source is not displayed.
ON:
AUX source is displayed.
• OFF is not displayed when the optional DVD player or DVD
changer is connected.
• When OFF is selected, the settings related to AUX cannot be
changed from this unit.
• When either DVD player or DVD changer is connected to AUX IN
1, EXT. DVD is displayed on the screen. When both of them are
connected, EXT. DVD is displayed for AUX IN 1 and DVD CHG is
displayed for AUX IN 2.
• AUX IN 2,3 is displayed when the external expansion box (VPE-
S431) is connected.
Naming External Devices
When more than one external device is connected, you can name each
(up to 3) as you like. After setting to ON in "Setting the AUX mode,"
touch any one of the [
] buttons of AUX IN 1 through 3, then this
setting may be carried out.
Setting items: NAME
Setting contents: AUX / VCR / GAME-1,2 / TV / NAV.
• The selected source name is displayed instead of AUX source
name. When a source is selected, the Function Guide of AUX mode
appears.
• Only AUX IN-3 MODE can be named “NAV.” When AUX mode is
selected, “NAV.” is displayed as the source name.
This setting is recomended if you view the navigation screen on the
rear monitor. However, it is available only when the Alpine
navigation system (except RGB navigation) is connected.
• Only when an Alpine TV tuner is connected, can you operate the
displayed function guide from this unit.
Adjusting the External Input Audio Level
After setting to ON in "Setting the AUX mode," touch any one of the
[
] buttons of AUX IN 1 through 3, then this setting may be carried
out.
Setting item: LEVEL
Setting content: LOW / HIGH
LOW: Decreases the external input audio level
HIGH: Increases the external input audio level
Setting of the External Monitor Output
Set it to ON when you use the rear entertainment function (page 23).
Setting items: MONITOR OUT-1, 2
Setting contents: OFF / ON
ON: By setting the connected external monitor to ON, the
remote control will be usable.
OFF: When either MONITOR OUT 1 or 2 is set to OFF, only
one monitor can be set by the rear enter function.
When both MONITOR OUT 1 and 2 are set to OFF,
REAR SELECT, which is displayed on the SYSTEM
selection screen, cannot be used.
• “MONITOR OUT-2” is displayed when “ON” is set in
“Connecting and Setting the External Expansion Box” on page 33.
Setting of the Rear Camera
When the rear camera is connected, rear pictures are output on the
screen.
Setting item: CAMERA IN
Setting contents: OFF / ON
ON: Even if the shift lever is not set to reverse (R), the rear
pictures are output by pressing V.SEL and selecting the
CAMERA source.
OFF: The rear pictures are not output.
• By shifting to reverse (R), the rear pictures are output.
This function is effective when the reverse wire is properly
connected.
Setting Visual Mode
This setting changes the function of the V.SEL button on the unit.
Setting item: V.SEL KEY
Setting content: V.SEL / NAV.
NAV.: Pressing V.SEL directly switches to the navigation
screen. (Only when an Alpine optional RGB Navigation
is connected.)
V.SEL: Press V.SEL to recall the VISUAL Select screen.