AT&T 76450 - Manual (Page 31)

Common Systems Connection Standards AT&T Services, Inc
Date: June 2013
ATT-TP-76450, Issue 15
Copyright © 2013, AT&T . All Rights Reserved.
Page 31
Appendix B – ATT-TP 76450 Checklist
(NOTE: No or N/A responses below require written detailed in comments)
Manufacturer:________________________________ Date: ______________________
Equipment Name/Model Number, etc.: _______________________________________
Contact Name:___________________ Phone Number: _________________________
Product Description (check all that apply):
Frame or Cabinet
Multi-Frame or Cabinet
Single Shelf
Multi-Shelf
Transport Product
Switching Product
Customer Premises Application
Non-network Product
ATT-TP-76200 Evaluation Type: Level 1
Level 3 OSP
Note: If product is Level 3 or unknown respond to each requirement number below. If product
is only Level 1 or OSP only respond if applicable column below is marked “yes”.
*Refer to paragraph number in previous sections for detailed requirements
Rqmt* Description L1 OSP Yes No N/A
2 DC POWER INTERCONNECTION STANDARDS
2.1 General
2.1.1 Nominal -48V DC Power yes yes
2.1.2 AC Powered Equipment yes yes
2.2.1 Redundant Power Feeds n/a n/a
2.2.2. Power Feeder Information n/a n/a
2.2.3 Battery Return Conductor n/a n/a
2.2.4 Battery Return Configuration DC-I n/a n/a
2.2.5 Diverse Cable Routing n/a n/a
2.3.1. Rear Power Terminations n/a n/a
2.3.2 Front Power Terminations. n/a n/a
2.4.1 8 AWG and Larger Stranded Power Cable n/a n/a
2.4.2 16 AWG to 10 AWG Stranded Power Cable n/a n/a
2.4.3 Equipment surface terminations n/a n/a
2.4.4 18 AWG Power Cable and Smaller n/a n/a
2.2.5 Compliance to Table 2-1 n/a n/a
2.5 AC Connectors n/a n/a
2.6.1 Circuit Breakers / No Power Protection – Requires bay
mounted fuse panel yes n/a
2.6.2 Placement in a switching environment n/a n/a
2.6.3 Placement in the transport environment n/a n/a
2.6.4 Fuses n/a n/a
2.6.5 Approved Fuse Styles n/a n/a