Poolmaster 59025 Above-Ground Pool Solar Heater - Manual (Page 10)

9
(2)
(1)
T-CONNECTOR
• With the last hose, connect one end to the last
T-connector opening (1) and the
other end into your pool (2).
Make sure the hose is pushed all the way to the
end of the adaptor. Tighten the hose clamp.
• Congratulations! You’re finished with your assembly.
Now, let’s learn how to use your 3-Way Bypass Valve.
DIAGRAM 5 - Using Multiple Solar Heater WITH 3-Way Bypass Kit
To best regulate your water temperature for a larger pool size, we recommend this setup.
1. Purchase an additional Poolmaster Solar Heater
2. Follow the set-up instructions in Diagram 2 - Using One Solar Heater WITH 3-Way Bypass Kit
bridging the two units together using the incoming and outgoing hose connection method
shown in diagrams 3 & 4.
POOL
WATER
OUT
INCOMING
HOSE
3-WAY
BYPASS
VALVE
T-CONNECTOR
OUTGOING
HOSE
WARMED
WATER
IN
SOLAR
HEATER
SOLAR
HEATER
INCOMING
HOSE END
OUTGOING HOSE END
FILTER PUMP SYSTEM