Penske Racing Shocks 75DBDRAG-STRUT User Manual
Page 5
PS-75DBDRAG-STRUT · Pro Drag Strut
2010/2011
5
Getting Started:
The Pro Drag Struts are set from the factory at recommended starting settings for your application.
They are pressurized and ready to go. The starting pressure for the Pro Drag Strut is
75 psi.
Adjusters:
The dual-bleed adjusters are nested within the same mechanism. This means that when making a
compression adjustment, the rebound adjuster will NOT turn. When making a rebound adjustment, the
compression knob will rotate. This is normal. If the rebound adjuster turns when you are making a
compression adjustment, you may be side loading the knob or you may have “locked” them together. If
this happens, simply put a 7/16 wrench on the rebound adjuster flats and break the compression
adjuster loose with a 5/16 Allen by turning counter-clockwise.
The Dual-Bleed adjuster mechanism provides the following ranges:
Compression Adjuster (5/16 Allen) / Silver Adjuster: 20 clicks
(stiffer = clockwise; 0 = full hard, -20 = full soft)
Rebound Adjuster (7/16 Hex) / Gold Adjuster: 30 clicks
(stiffer = clockwise; 0 = full hard, -30 = full soft)
Top View of Strut
Do not over-tighten the adjusters. When making adjustments, they will have a positive stop. In order to
close off the bleed, you do not need to continue to turn the knob for it to seal.
COMPRESSION
KNOB
(
REBOUND
KNOB
(