Penske Racing Shocks 8975-DRAG - Manual (Page 5)

PS-8975-DRAG (Double Adjustable) 2010/2011
5
Getting Started:
Shocks are sent from the factory at recommended start settings for the application in which they were
ordered - pressurized and ready to go.
Some basic tools needed to adjust the 8975 Series shocks are:
1.) Allen Key (3 mm): to secure ride height adjuster after setting ride height with springs.
2.) Pre Load Adjuster Tool: to make ride height adjustments to spring perch.
3.) Allen Key (5/32”): to make compression/rebound adjustments.
1.) 3mm Allen Key to Lock Perch 2.) Pre Load Adjuster Tool
3.) 5/32” Allen Key for Compression/Rebound Adjustment