Nitrous Express Radio Controlled Nitrous System - Manual (Page 2)

Install the supplied mini-toggle in the electronics
cover.
Connect the 9-Volt battery terminal to the battery
prior to installation into the vehicle
An example of the perfect battery location on the
savage is under the receiver mount.
Place the battery under the receiver mount and re-
install the mount while keeping the battery leads to
the side. Make sure all wires are secure and receiver
mount sits down in original position.
Using the template provided on the last page of your
installation instructions, mark the best location to
mount your solenoid. Once you mark this location,
center punch and drill using an 1/8th inch drill bit.
Once drilled, you may mount the solenoid.