MBRP S7102 - Manual (Page 4)

S7102 © 12/12 PAGE 4 OF 4
6. Slide a 3” Band Clamp onto each Tailpipe. Attach the Muffler
Assemblies to the Tail Pipes. Use the M8 Exhaust Hangers and
the hardware provided to attach the Muffler Assemblies to the
vehicle. Refer to Figure 10.
7. Slide the Exhaust Tips onto the Muffler Assemblies. Align
the Exhaust tips as required. Starting at the front of the exhaust,
tighten all clamps and connections.
Refer to Figure 11.
8. Check along the whole length of the exhaust system to ensure
that there is adequate clearance around the spare tire, fuel and
brake lines or any wiring. If any interference is detected relocate
or adjust.
Congratulations! You are ready to begin experiencing the improved power, sound and driving
experience of your MBRP Inc. performance exhaust system. We know you will enjoy your purchase.
Figure 10
Figure 11