MBRP S7110 - Manual (Page 4)

S7110 © 09/10 PAGE 4 OF 4
7. Slide a 3” Band Clamp onto each Tailpipe. Attach the
Muffler Assemblies to the Tail Pipes. Use the M8 Exhaust
Hangers and the hardware provided to attach the Muffler
Assemblies to the vehicle. Refer to Figure 10.
8. Slide the Exhaust Tips onto the Muffler Assemblies. Align
the Exhaust Tips as required. Starting at the front of the
exhaust, tighten all clamps and connections.
Refer to Figure 11.
9. Check along the whole length of the exhaust system to
ensure that there is adequate clearance around the spare tire,
fuel and brake lines or any wiring. If any interference is detected
relocate or adjust.
Congratulations! You are ready to begin experiencing the improved power, sound and driving
experience of your MBRP Inc. performance exhaust system. We know you will enjoy your purchase.
Figure 10
Figure 11