MBRP S5132 - Manual (Page 2)

S5132 © 01/08 PAGE 2 OF 3
2006-2007 Dodge Ram 1500 Megacab
5.7L HEMI
Removal of stock system:
1. Apply a penetrating lubricant liberally to all exhaust fasteners,
hangers and rubber insulators.
2. Remove clamp just after the Y pipe. Refer to Figure 1.
3. Remove clamp from the rear of the muffler. Refer to Figure 2.
4. Remove the stock exhaust from the existing hangers and remove
the system from the vehicle.
Installation of MBRP Inc. Performance Exhaust:
1. Install the Extension Pipe over the existing Y using the 3” Band
Clamp. Leave all clamps loose enough for adjustment. Refer to
Figure 3.
2. Slide the 3” Hanger Clamp over the Extension Pipe and install
Muffler onto the Extension Pipe. Install the 3” Hanger Clamp into the
existing rubber insulator. Refer to Figure 4.
Figure 1
Figure 2
Figure 3
Figure 4