MBRP S5306 - Manual (Page 3)

S5306 © 03/13 PAGE 3 OF 4
2. Install the Passenger Side Front Pipe reusing the existing hardware.
Leave the hardware loose enough for some adjustment.
Refer to Figure 5.
3. Slide 2.5”Clamps over the Passenger Side Front Pipe and the Driver Side
Front Pipe. Install the Mufflers onto the Driver Side Front Pipe and then the
Passenger Side Front Pipe.
Refer to Figure 6.
4. Slide a 2.5”Clamp over the outlet side of the driver’s side Muffler. Position
the Driver Side Over Axle Pipe and loosely attach it to the Muffler. Install the
Driver Side Over Axle Pipe hanger into the factory rubber insulator. Refer to
Figure 7.
5. Slide a 2.5”Clamp over the Driver Side Tail Pipe and install onto the
Driver Side Over Axle Pipe. Install the Hanger Assembly onto the Driver
Side Tail Pipe and install to the frame using the fastener provided. Refer to
Figures 8, 9 and Detail A on Page 1.
Figure 5
Figure 6
Figure 7
Figure 8
Figure 9