MBRP S5506 - Manual (Page 2)

S5506 © 05/08 PAGE 2 OF 3
2007-2008 JEEP COMPASS/ PATRIOT AWD 2.4L
Removal of Stock System:
1. Apply a penetrating lubricant liberally to all exhaust fasteners, hangers
and rubber insulators.
2. Begin by loosening the clamp just after the catalytic converter. Refer
to Figure 1.
3. The exhaust can be removed from the vehicle by sliding the hangers
from the rubber isolators, one on each side.
Refer to Figures 2 & 3.
Installation of MBRP Inc. Performance Exhaust
1. Install the Extension Pipe using a 2 ¼” Clamp and attaching it to the
existing rubber isolator. Leave the clamp loose enough for some
adjustment. Refer to Figure 4.
Figure 1
Figure 2
Figure 3
Figure 4