MBRP S5144 - Manual (Page 2)

S5144 © 12/12 PAGE 2 OF 3
2009-2012 Dodge Ram 1500 5.7L HEMI
Removal of stock system:
1. Apply a penetrating lubricant liberally to all exhaust fasteners, hangers
and rubber insulators.
2. Remove clamp just after the Y pipe. Refer to Figure 1.
3. Remove clamp from the rear of the muffler. Refer to Figure 2.
4. Remove the stock exhaust from the existing hangers and remove the
system from the vehicle.
Installation of MBRP Inc. Performance Exhaust:
1. Install Front Pipe over the existing Y using the 3” Clamp. Leave the 3”
Clamp loose enough for adjustment. Refer to Figure 4. Note the front pipe
will not be required on a regular cab short box.
2. Slide a 3” Hanger Clamp over the Front Pipe attach the hanger to the existing
rubber insulator. Install the Extension Pipe to the Front pipe using the 3”
Hanger Clamp. Refer to Figure 4.
Figure 1
Figure 2
Figure 3
Figure 4