MBRP S4202 - Manual (Page 4)

S4202 © 07/14 PAGE 4 OF 4
9. Install the Exhaust Tips onto the Tail Pipe Assembly. Ensure that the Tail
Pipe Assembly is level and the Exhaust Tips are centred in the fascia
opening.
Refer to Figure 10.
10. Align the exhaust as required. Pay particular attention to the location of
the Exhaust Tips and the Tail Pipe Assembly. Starting at the front of the
exhaust, tighten all clamps, hangers and connections. Ensure each joint is
secure.
11. Check along the entire length of the exhaust system to ensure that there is
adequate clearance between the exhaust system and heat shields, cross
members, and body panels.
Congratulations! You are ready to begin experiencing the improved power, sound and driving experience of
your
MBRP Inc.
performance exhaust system. We know you will enjoy your purchase.
Figure 10