MBRP S5224 - Manual (Page 3)

S5224 © 12/12 PAGE 3 OF 3
2. Install the Muffler onto the Extension Pipe using the Hanger Clamp
provided. Then install the 2 ½”Hanger Clamp into the factory rubber
insulator. Do not tighten the clamp at this time. Refer to Figure 5.
3. Loosely install the Turn Down connecting it to the Muffler outlet with the
2 ½” Hanger Clamp. Install the Hanger Assembly to the 2 ½” Hanger
Clamp and to an existing hole in the frame using the fasteners provided. Refer
to Figures 6 &7.
4. Ensure that the exhaust is properly in place before tightening clamps. Start at
the front of the exhaust system and begin tightening all connections.
Congratulations! You are ready to begin experiencing the improved power, sound and driving excitement of your MBRP
Inc. performance exhaust system. We know you will enjoy your purchase.
Figure 5
Figure 6
Figure 7