MBRP S5224 - Manual (Page 2)

S5224 © 12/12 PAGE 2 OF 3
Removal of Stock System
1. Apply a penetrating lubricant liberally to all exhaust fasteners, hangers and rubber
insulators.
2. Remove the bolts and springs holding the front flange together and disconnect the
exhaust system. Refer to Figure 1.
3. Remove the hangers from the rubber insulators and remove the exhaust from the
vehicle. Refer to Figures 2 & 3.
Installation of MBRP Inc. Performance Exhaust:
1. Loosely attach the Extension Pipe to the flange using the Shank Bolts and
Springs provided. Refer to Figure 4.
Note: The Extension Pipe will need to be trimmed on some models. Refer to the
illustration below.
Figure 1
Figure 2
Figure 3
Figure 4