beautypg.com

Rear panel – Asus 24x/10x/40x CD-RW Drive CRW-2410S User Manual

Page 13

background image

ASUS CRW-2410S User’s Manual

13

Rear Panel

1. Digital audio connector

This connector is for a digital signal output cable.

2. Analog audio connector

This connector is for an analog signal output cable.

3. Factory test pins

These pins are used for factory testing.

NOTE:

DO NOT cover these pins with jumper blocks.

4. CS/SL/MA pins

These pins are used to set the drive to either a master or slave device.

5. IDE connector

This connector is for a 40-pin IDE cable to connect the drive to the IDE
interface on the motherboard.

6. Power connector

This DC connector is for a 4-pin power cable from the system power
supply.

See also other documents in the category Asus Hardware: