MBRP S6282 User Manual
Page 4
S6282 © 07/13
PAGE 4 OF 4
9. Using the supplied M10 Hex Bolts, loosely secure the 2 bolt down pipe flange to the OEM flange.
Refer to Figure 10.
10. Ensure that there is enough clearance between the MBRP Downpipe Assembly and the firewall, transmission
cooler lines, and frame. Adjust if necessary. Once clearances have been checked, tighten all clamps and flanges.
11. Reinstall the OEM turbo heat shield with the previously removed hardware.
Congratulations! You are ready to begin experiencing the improved power, sound and driving experience of
your MBRP Inc. performance exhaust system. We hope you enjoy your purchase.
See also other documents in the category MBRP For the car:
- UT6001 (3 pages)
- UT2001 (3 pages)
- UT4001 (4 pages)
- UT8001 (4 pages)
- GM8427 (3 pages)
- GM8425 (3 pages)
- F2313 (2 pages)
- GM8424 (2 pages)
- S6028 (4 pages)
- S6110 (2 pages)
- S6014 (4 pages)
- S6168409 (2 pages)
- S6172409 (2 pages)
- S6210 (4 pages)
- S6132 (3 pages)
- S6002 (4 pages)
- S6122 (4 pages)
- S6106 (3 pages)
- S6006 (5 pages)
- S6162409 (2 pages)
- S6202 (3 pages)
- S6244 (3 pages)
- S6128 (3 pages)
- S6102 (3 pages)
- S6214 (4 pages)
- S6165AL (2 pages)
- S6164AL (2 pages)
- S6206 (4 pages)
- S6100 (3 pages)
- S6167 (3 pages)
- S6166 (3 pages)
- S6156 (2 pages)
- S6157 (2 pages)
- S6150PLM (1 page)
- S6150P (1 page)
- S6150 (4 pages)
- S6224 (3 pages)
- S6020PLM (1 page)
- S6200 (3 pages)
- S6212 (4 pages)
- S6285 (3 pages)
- S6126 (3 pages)
- S6020 (3 pages)
- S6116 (3 pages)
- S6004 (4 pages)