MBRP S6242 - Manual (Page 2)

S6242 © 02/10 PAGE 2 OF 3
2008 Ford Super Duty 6.4L Powerstroke Diesel
Removal of Stock System:
1. Apply some penetrating lubricant liberally to all exhaust
fasteners, hangers and rubber insulators.
2. Loosen the nut on the band clamp located behind the
particulate filter using a 15mm wrench or socket.
Refer to Figure 1.
3. Cut the exhaust as shown in Figure 2. Remove the muffler and
tail pipe from the OEM rubber insulators. Remove from the
vehicle.
Installation of MBRP Inc. Performance Exhaust:
1. The Extension Pipe provided is pre-cut for the crew cab long bed configuration. Cut the Extension
Pipe to the required length for the vehicle being installed to. Refer to Figure 3.
Figure 1
Figure 2
Figure 3