beautypg.com

Specifications, Features – Manley SHRIMP User Manual

Page 16

background image

SPECIFICATIONS

Vacuum Tubes:

input tubes: 2 x 12AT7WA , output tubes 2 x 7044

Lamp type

1/4" X 1 1/4", 12 volt, 0.15 amp "fuse-lamp" (no, it is not a fuse)

Fuse type

120VAC operation: MDL 1/2 AMP / 250 Volt SLO-BLO

240VAC operation: MDL 1/4 AMP/ 250 Volt SLO-BLO

Gain

11.8 dB max

Noise Floor

Typically -95 dB A WGT 20-20K with volume control fully open

(shorted input)

Typically -106 dB A WGT 20-20K with volume control fully closed

Frequency Response 10 Hz - 80 KHz (-0.5dB at 20KHz)

Volume control "Left / right tracking" within 0.25 dB

Input Impedance: 250 Kohm

Output impedance: 50 ohms

Maximum Output: +26dBu @ 1.5% THD into 100K load
Maximum Output: +21dBm @ 1.5% THD into 600 ohm load

Power Consumption: 33 Watts (275mA @ 120VAC)

Dimensions: W=19", L=11", H=3 1/2"
Shipping weight: 15 lbs.

Five line level inputs unbalanced RCA
MUTE switch and Warm-Up muting delay
Accurately tracking NOBLE volume control
Center detented NOBLE balance control
Record Output
Two paralleled sets of unbalanced RCA main outs
All-Tube Single-Ended signal path
Built-in fun and happy tunes :>)

16

FEATURES