Manley СORE REFERENCE CHANNEL STRIP - MCORE001-025 4/2014 - 5/2014 - Manual (Page 14)

16. Curves & Specifications
c o r e
13
MID EQ PLOT
15
LIMITER, MIN, MED, MAX
EQ SHELF
• ALL-TUBE preamplifier audio path using 1 x 12AX7WA for gain and 1 x 6922 White follower output
• Balanced Transformer Coupled XLR Microphone Input Impedance: 1200 Ohms
• Balanced XLR Line Input Impedance: 10K
• Unbalanced 1/4" Direct Input Impedance: 10 Meg Ohms
• Hi-current drive Direct XLR output Impedance: <50 Ohms
• Silent conductive plastic INPUT attenuator
• Compressor Maximum GAIN REDUCTION: 16dB
• Compressor ATTACK time: 80 mS slowest CCW, 40 mS at 12:00, 4mS fastest CW for 3dB compression
• Compressor RELEASE time: 1.47 Sec slowest CCW, 1 Sec at 12:00, 470 mS fastest CW from 3dB
compression
• Maximum Input Mic input: -5dBu or 435mV @ LOW gain -25dBu or 44mV RMS @ HI gain 0.5% THD
• Maximum Input Line input: +13dBu or 3.5V RMS @ LOW gain -8dBu or 300mV RMS @ HI gain 0.5% THD
• Maximum Input Direct input: + 24dBu or 12V RMS @ LOW gain +17dBu or 5.5V RMS @ HI gain 0.5% THD
• Maximum Input Insert return: + 20dBu or 7.8V RMS @ 0.5% THD
• Maximum Preamp Output (Insert Send): + 35dBu or 43V RMS @ 0.5% THD
• Maximum Main Output: +20dBu
• Main Output Impedance: 50 Ohms
• Headroom (referenced to +4dBv) 16dB at OP2 (Main) or 31 dB @ OP1 (Preamp)
• Frequency Response: 10 Hz to 20 kHz ±0.5 dB
• Large 3” LED illuminated VU METER
• Meter switch to read OUTPUT from Preamp, OUTPUT from Main Out, or Compressor GAIN REDUCTION
• Dynamic Range >90dB
• Noise Floor (Gain set to minimum): -70dB Wideband
• Gain via Microphone Input: 40 or 60 dB
• Gain via Line Input: 20 or 40dB
• Maximum Gain of EQ & Limiter section: 10 dB
• AUTOMUTE warmup delay: 30 Seconds
• Power consumption: 35 watts
• Operating mains voltage: universal supply 90 VAC to 254 VAC
• Mains Voltage Frequency: 50~60Hz
• Dimensions: 19" x 3 1/2" x 7" (occupies 2u)
• Weight = 8.3 lbs / Shipping weight: 11.5 lbs.