AirLive WL-8000PCM - Manual (Page 27)

- 23 -
for all Security settings.
Enable CCX mode：Enables connections in CCX
mode. When checked, additional authentication modes
are available.
This checkbox is only enabled when Super Profile is
set to Enterprise.
Configure ： Click Configure to open the
configuration window.
Open Advanced Mode：Click Open Advanced Mode to
configure the following screen：
Power Save Mode: Indicates whether to use power
saving. This field can be one of the following:
♦
None：No power save mode.
♦
Max ：Max power save mode.
TX Power Level: The transmit power level, which
can be one of the following:
♦
Low Power (6% of full power)
♦
Medium-Low Power (12%)
♦
Medium-Power (25%)
♦
Medium-High Power (50%)
♦
High Power (100%)
TX Rate: The preferred rate of transmission, in Mbps.
The options for this field are based on the selected
band and channel,
Packet Burst: Indicates whether the Packet Bursting
feature is enabled.
Turbo Mode: Indicates whether the 4X feature is
enabled.
Fragment Threshold: The maximum fragment
length, in bytes. The value is an even number from
256 to 4096 (default is 4096).