King of Fans Belmont - Manual (Page 4)

Unpack your fan and check the contents. You should have the following items:
1. Blades
(5)
2. Blade brackets (5)
3. Decorative faceplates (5)
4. Canopy
5.
Decorative motor collar cover
6. Fan motor assembly
7. Light kit plate
8. Ball/Down rod assembly
9. Wiring case assembly
10a. Hand held remote transmitter.
10b. Receiver with 6 wire Nuts
11. 25W bulbs (3)
12. Glass
Shade
13. Support bracket
a. Blade attachment hardware
(One group of 15 screws and spring
washers to attach the blade bracket set,
decorative faceplates to the blades. The
other group of 15 screws and spring
washers to attach the blade bracket set to
the fan motor assembly)
b. Mounting hardware
(1 bolt, 1 clevis pin ,1 rubber gasket )
c. Electrical hardware & Balancing kit
(3 plastic wire connectors, blade
balancing kit )
d. 1 decorative nut
IMPORTANT
This product and/or components are
covered by one or more of the following
U.S. patents: 5,947,436; 5,988,580;
5,971,573; 6,010,110; 6,010,306;
6,039,541; 6,046,416 and other patents
pending.
Unpacking Your Fan 2.
d