Asus M2A690G User Manual
Page 68

4-13
ASUS V-Series M2A690G
14. Ports on the HDMI module
This module contains four ports, allowing you to connect any kind
of video/audio source to your system. Connect the HDMI module to
the onboard PCI Express x16 slot and the HDMI module cable to the
onboard YUV/SPDIF_OUT connector.
a. HDMI port. This port is for a high-definition multimedia interface
(HDMI) connector.
b. S-Video port / YPbPr port. This 7-pin port connects any kind of video
source via a YPbPr cable or an S-Video cable.
c. Video port. This port connects any kind of video source via an RCA
cable.
d. S/PDIF Out port. This port connects an external audio output device
via an coaxial S/PDIF cable.
d
a
b
c
• The YPbPr cable, RCA cable and the S-Video cable are purchased
separately.
• Simultaneous output for YPbPr, AV, S, and RGB is not supported.
YPbPr cable
• Refer to page 1-29 for the position of the onboard YUV/SPIDF_OUT
connector.
• After installing the HDMI module, make sure the audio device of
Sound playback is HDMI Audio rear output (the name may be
different based on the OS). Go to Start > Control Panel > Sounds
and Audio Devices > Sound Playback to configure the setting.