Hootoo HT-IP212 User Manual - Manual (Page 35)

More Security, More Convenience
35
TP-LINK:
1. Login the router .
2. Choose “Forwarding”, select “Virtual Servers”
3. Click the Add New button, pop-up below:
Figure 7.5
Fill the service port ( except 80 ), IP address of the camera, then click Save
NOTE: The port and IP address should be the same as Camera.
BELKIN:
1. Login the router.
2. Choose “Firewall”, select “Virtual Servers”
3. Input the port (
except 80 ) and IP address, then click save.
NOTE: The port and IP address should be the same as Camera.
Figure 7.6
DLINK:
1. Login the router.
2. Choose “Advanced”, select “Virtual Servers”
3. Input the port, IP address, Protocol, then click save.
NOTE: The “public port” & “private port” should be the same as camera’s port, choose the protocol to be