Hootoo HT-IP212 User Manual User Manual
Page 22
More Security, More Convenience
22
Preset Settings
Figure 4.5
:
Set Preset Position. It supports 15 preset positions. Firstly, control the camera rotate to the special
position you need to set, click Set Preset Position button
, it will pop-up a dialog frame(Figure 4.5),
choose the any number (1-15) you want to set it be, then it done.
NOTE: Set different positions with a same number, camera will record the last position setting only.
:
Call Preset Position. It supports 15 preset positions. If operator wants to monitor an important area
quickly and precisely, just click Call Preset Position button
,
it will pop-up a dialog frame(Figure 4.5),
choose the number, then camera will rotate to the preset area automatically.
If you want to use Call Preset Position, you have to Set Preset Position firstly.
NOTE: For Operator, if you click other menus which operator don’t have the right to operate it, there will be a
pop-up of login interface (Figure 2.7), please input the user name / password for at least 3 times to login again.
2.9 For Administrator
Details see Settings as Administrator (details3.1-3.22).
.