Equus 3320 - Auto-Ranging DMM - Manual (Page 6)

BATTERY TEST (LEDs)
DIODE/CONTINUITY TESTS
5
Function Range Resolution Description Note
Diode Test 2V 1mV Test Current:
1±0.6mA
Test Voltage:
Overload
Approx. 1.5V Protection:
Continuity 200 Ω 0.1 Ω Approx. 120 Ω or 250V DC or
Test less, buzzer AC RMS
(beeper) will
sound
E
When the voltage of the battery being tested is lower than
10% of its rated voltage, the red LED will not light.
Load
Range Resolution Current Accuracy Notes
Green LED: 1.30V
±0.075V and up.
Yellow LED: 0.94V
1.5V 0.001V 10mA ±0.075V to 1.29V
(approx.) ±0.075V.
Red LED:0.15V±0.075V
to 0.93V±0.075V
Green LED: 5.22V
±0.3V and up.
Yellow LED: 3.76V
6V 0.01V 100mA ±0.3V to 5.21V±0.3V.
(approx.) ±(5% of Red LED:0.6V±0.3V to
reading 3.75V±0.3V
+ 5 digits) Green LED: 7.83V
±0.45V and up.
Yellow LED: 5.64V
9V 0.01V 10mA ±0.45V to 7.82V±0.45V.
(approx.) Red LED:0.9V±0.45V to
5.63V±0.45V
Green LED: 10.44V
±0.6V and up.
12V 0.01V 200mA Yellow LED: 7.52V
(approx.) ±0.6V to 10.43V±0.6V.
Red LED:1.2V±0.6V to
7.51V±0.6V