DECO BREEZE Adjustable Height Floor Fan - Manual (Page 3)

2
Fan Assembly
1. Carefully unpack the fan base, motor head, fan grill (front and
back) and fan blades from the Styrofoam packing cradle.
2. Attach the round fan base to the fan base pole by inserting pole
through round fan base and securing together using the black
center weight, washer and L shape screw – as shown in the
diagram.}
3. Remove the center lag bolt and
black plastic locking screw, the
small set screw and the black tilt
adjustment screw from the fan
motor attachment base. (see
Picture A)
4. Attach the fan motor to the
upright fan base by sliding down
and aligning the screw holes.
5. Then insert the lag bolt and secure
with the black plastic locking nut.
6. Re-insert the set screw and black
plastic tilt adjustment screw and
tighten securely.
7. Remove the black plastic locking nut
screw from the fan motor pin. (see
Picture A)
8. Remove the cap screws from the fan
motor face plate.
9. Fit the rear grill assembly onto the
motor pin by lining up the screw holes.
Make sure the fan grill handle is at the
top center of the alignment and re-
insert and tighten the screws in place.
(see Picture B)