Cyron Lighting HTP2406W2 - Manual (Page 2)

21029-C ITASCA ST., CHATSWORTH, CALIFORNIA 91311 USA
www.cyron.com
HTP1506W2/2406W2
Multicolor LED Lighting System
Thank you for purchasing CYRON HTP1506W2/2406W2 LED Lighting
System. This system will bring the latest lighting technology to your home
theatre, home décor, cabinets, and many other areas you choose. Installation of
the system is simple and it can be done by anyone with little or no electrical
experience. Nonetheless, some custom installations may require professional
help. Please contact CYRON Technical Support at 888-297-6660 ext.106 for
advice.
Contents _____
Please locate all system components. If any of
the components are missing or damaged contact
CYRON before proceeding with installation.
1 x Controller
1 x Remote control
6 x Lightbars
1 x Power supply
12 x Mounting brackets
12 x Mounting tapes
Wipes/hardware
General Cautions _____
To reduce the risk of fire, electric shock, or injury:
Route and secure cords so that they will not be pinched or damaged
To further secure the wires, use only insulated staples or plastic ties
Not intended for recessed installations
Not intended for surface installation inside built-in furnishings
Do not install the entire system in closed compartments smaller than
4 cubic feet (26”x30”x10”)
To comply with National Electrical Code (NEC) and to prevent fire
danger, run the cords where they are accessible for examination.
Cords should be visually examined periodically and immediately
replaced when any damage is noted.